Features & Benefits

A Power Rack will bring your workouts to another level if you have been working on selectorized equipment or a Smith Machine. This unit allows you to lift your barbell off the rack and actually move freely while you perform your squats, dead lifts or military presses. In contrast, on a selectorized machine or a Smith Machine you are attached in essence to the machines guide system so that you are safe and your body has the best chance at proper alignment but if you are ready for the next level you need to move freely so that your synergists and stabilizers have a chance to fire up and get strong.

Specifications

Frames:

All equipment is machined to a minimum tolerance of +/- .030"

The all-welded construction is primarily 3" x 3", 4" x 2", or 3" x 2" with 11-gauge steel and a combination of other heavy structural tubular steel

Frame Finish:

Powder-coated baked on finish that is scuff resistant and long wearing

Padding & Upholstery:

Padding is 2" thick virgin foam with a density of 12 lbs./cu. ft. Upholstery is 32 oz. Sulfide-stain resistant Naugahyde

All pads are top double-stitched

Bearings:

Input and movement arms rotate with either nonfriction roller bearings with Basic Radial Load Rating of 2,420 lbs., contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment

Weight Transport:

¼ " diameter aircraft cable with a 7 x 19 construction and black nylon coating. The cable is rated at a breaking strength of 4,200 lbs.

Weight Plates:

All selectorized equipment features solid steel weight stack plates with a black finish

Self-aligning low friction sleeve bearing surround the guide rods on every weight stack plate

Pulleys:

4½ " diameter fiberglass-impregnated nylon with a precision fit cable groove and double-sealed, nonfriction roller bearings

Guide Rods:

Solid steel and hard chrome-plated to ensure quiet operation and low friction movement

Fasteners:

All bolts meet ANSI B18.3 specifications

Spring Suspension:

Heavy-duty die cast springs are used under the weight stack to reduce shock and vibration stresses

Lanyard Pins:

All selectorized equipment features weight stack pins that are lanyard with a coiled self-storing cord to prevent pin removal or loss

Handgrips:

45 durometer rubber handgrips are used for comfort, safety, and durability.

Made in USA

Exercises

Use your Power Rack to perform:

• Squats
• Overhead Presses
• Lunges
• Barbell bicep curls
• Dead lifts
• Military Presses

More Info

This unique weight lifting aid is patented and the following is the description:

It is made up of four vertical posts which have a movable horizontal bar and places to set the bar along the side of the unit.The device is secured by bars which run along the top and bottom giving it the look of a cage. The side bars will catch the barbell if you should drop the bar making it safer than simply lifting a bar and the guides or catches make it easier to start and end the exercises because you are not reaching down to the floor.